Feedback Form for Customer Selection of Drying Equipment

Please fill out the form in detail so that our company can provide careful selection recommendations

1.Material name:  Molecular formula:  PH:

2.The form of dry materials:  Micropowder    Powder material    Granule    Massive    Flaky    Size    Filter cake    Pasty    Creamy    Solution    Fibrous    Emulsion    Suspension liquid

3.Other characteristics of the material:  Flammability    Explosiveness    Agglomeration    Odor   Other 

4.Name of evaporated medium:  Molecular formula:  PH:  Boiling point of the evaporated medium: ℃ ;
Do you need to recycle: Yes  No 

5.Initial moisture content of the material:% ;  Including crystalline water:   ; Requirement for moisture content after drying:% ;
Request for remaining crystalline water:

6.Initial temperature of material:℃ ;  Temperature required after drying:℃.  Whether to use cooling for material collection:

7.The maximum temperature that the material can withstand during drying: ℃;The optimal temperature range for material drying: ℃

8.Softening temperature of materials: ℃;Melting point of materials: ℃

9.Specific heat of materials: KJ/kg. ℃;Thermal conductivity of materials: KJ/m2.h. ℃

10.The true density of the material: kg/m3,Bulk density of materials: kg/m3

11.Material particle size distribution range: mm To mm; Proportional content≥ %
Among them: maximum particle size mm; Proportional content≥ %
Minimum granularity: mm; Proportional content≥ %

12.Requirements for particle size of finished products after drying: mm

13.The viscosity of the material in its original state: cp; Does heating reduce viscosity: Yes No

14.Can the shape of the material be damaged during drying: Can No

15.Product yield after drying: kg/h （Or wet material processing capacity: kg/h）

16.Drying method requirements:  Continuous drying 、  Gap drying 、  Dynamic drying 、  Static drying 、  Hot air drying 、  vacuum drying 、  microwave drying 、Other:

17.Past drying methods for materials or drying methods for similar products: Desired dryer model:

18.Air intake requirements: Natural wind harvesting , 300000 level filtration, 100000 level filtration, 10000 level filtration, Other:

19.User's material requirements for drying equipment: The material contact area is made of stainless steel 、 All stainless steel 、 Titanium material 、 aluminium alloy 、 carbon steel 、 Enamel glass 、 Tetrafluoro 、 Other:

20.Proposed to use stainless steel model: SUS304 , SUS321 , SUS316 , SUS316L, SUS2235 , Other:

21.Requirements for material recovery rate:≥ %; Dust environmental emission requirements:≤ mg/nm3 ; Environmental emission requirements for exhaust gas:≤ mg/nm3; Maximum allowable discharge requirements for wastewater and waste liquid≤ mg/L

22.Hot medium and heat source used during the drying process: hot water ℃ ; steam Mpa; Heat transfer oil ℃; Electric heating 、Coal fired hot air stove 、
Oil fired hot air stove 、Gas hot air stove 、Other:

23.Thermal medium and heat source: Self provided 、Purchase separately 、Supporting procurement 、Other:

24.Cleaning and hygiene requirements for equipment：

25.Equipment usage location: 、Altitude: 、Humidity: 、Maximum temperature: 、Minimum temperature: 、Annual average temperature: 、Other:

26.Budget investment amount for equipment selection (in RMB): Ten thousand yuan

27.Other: